EN IT FR AR

Configurator

To create your very own Bucher Cosmix, try out our configurator.

Loading...

Upgrades Configuration
  • Installation
  • Conveying and mixing
  • Control System
  • Accessories
  • Finishes
1 / 5

Upgrades Available

1/5

Installation

Driven by on-board engine (CE version & extra CE version) i

A load-sensing system for when loading (filling) which is connected to the on-board engine, totally independent from the carrier vehicle.
Add to configurator
+

Subframe bolted on truck chassis i

The Cosmix can be bolted directly onto any truck, cab or trailer chassis, new or old.
Add to configurator
+

Subframe on customer specification i

Since each Cosmix machine is made to order, Bucher can provide a machine that is built to your precise needs.
Add to configurator
+

Subframe with twist-lock demounting system i

This has a 30-tonne capacity.
Add to configurator
+

Subframe for hooklift quick change system i

This has a 30-tonne capacity.
Add to configurator
+

Demount system with telescopic hydraulic support i

This option is only suitable for use with empty equipment, including residual material, either solid or liquid.
Add to configurator
+

Conveying and mixing

Cement fill up via bigbag or manual system preparation i

This option allows the Cosmix’s cement hopper to be filled using bigbags. The safety rails enable you to operate safely on top of the ladder.
Add to configurator
+

Powder additive system i

The powder additive system is used to add colourants or other additives. It has a capacity of 0.2m³.
Add to configurator
+

Fibre dispencer i

With the fibre dispenser you can add fibres to your mix to suit your cement requirements.
Add to configurator
+

Control System

Advanced reporting system i

This system weighs the material before and after production to give a precise material consumption value for equipment calibration, reporting or invoicing your customer.
Add to configurator
+

Auto calibration system i

This system weighs the material during the production in order to produce exactly what is required from the mix design, regardless of the calibration.
Add to configurator
+

Rear-view camera i

The rear-view camera is there to help the driver during manoeuvres. Independent from the control equipment control system, it has a colour screen in the vehicle cab.
Add to configurator
+

Accessories

Strobe light (beacon) i

There is one 24VDC orange strobe light, or beacon. It will switch-on automatically to indicate whether the machine is producing or stopped.
Add to configurator
+

Additional working lights i

The upgrade provides three additional working lights to help at night or to give better lighting during sunrise and sunset.
Add to configurator
+

Auger protective liquid sprayer i

The pressure tank sprays protective liquid on the mixing auger to preserve it from premature wear.
Add to configurator
+

Finishes

Stickers i

A custom sticker set can be added at your request.
Add to configurator
+

Colour on request i

The vehicle painting colour can be defined by your specifications.
Add to configurator
+

Standard Equipment

Truck engine with power take-off (PTO)i

A load-sensing system for when loading (filling) which is connected to the truck PTO (power take-off).

Aggregate hopperi

Located at the top of the Cosmix, the aggregate hopper stores the premixed sand, gravel, stone or other aggregates. It is split into two hoppers totalling 9m³ (4m³ and 5m³).

Cement hopperi

The cement hopper is 2.5m³. It has a hydraulic driven auger conveyor with a proportional valve that is able to adjust the cement flow to the mixing system.

Hopper vibratorsi

This is an anti-sticking system involving five vibrators (24VDC). There are two for the aggregate hopper, two for the cement hopper, and – if present – one for the powder additive hopper (this hopper is available as an optional upgrade).

Hydraulic tarp coveri

The PVC foldable tarp cover protects the aggregates from wind and rough terrain, helping to stop the material from falling to the ground.

Conveyor systemi

The conveyor system has a variable speed, combined metal and rubber belt. The system adjusts the aggregates’ flow to the mixing auger. It uses a hydraulic driving system with proportional valve.

Automatic aggregates dosage systemi

The automatic aggregates dosage system consists of two gates. Between them, proportional openings are driven by a hydraulic distributor.

Rear end assembly, including mixing augeri

The 300mm mixing auger has been designed to ensure a high mixing capacity without compromising the maximum flow rate.

Discharging chutei

The discharging chute has four modular conveying funnels, which can be connected to adjust the conveying pouring distance.

Water supplying and metering systemi

The water delivery system includes all the necessary parts to precisely dose and control the water addition to the mix, emphasising the importance of the cement to water ratio.

Admixture systemi

The admixture system, which includes two liquid additive systems, can be operated independently.

Cement fill-up via pneumatic system preparationi

The pneumatic fill-up system is used to fill the hopper. This system includes the pipe, connection and the breather element with an integrated filter on top of the hopper.